Home

Back to
Auto XTL &
X-1000



Mamiya/Sekor ES Lenses for the Mamiya Auto XTL and X-1000
Lens Groups Elements View Angle Min. Aperture Diaphragm Min. Focus Dist. Filter Lens Hood Wgt
21mm f/4.0 ES 8 9 91º f/16 Auto 1.5 ft (0.45m) 58mm None n/a
28mm f/2.8 ES 7 7 75º f/16 Auto 1.5 ft. (0.45m) 58mm Slip-on n/a
35mm f/2.8 ES 4 7 63º f/16 Auto 1.50 ft. (0.45m) 52mm Slip-on n/a
55mm f/1.4 ES 5 7 43º f/16 Auto 1.50 ft. (0.45m) 52mm Built-in n/a
55mm f/1.8 ES 5 6 43º f/16 Auto 1.50 ft. (0.45m) 52mm Built-in n/a
105mm f/2.8 ES 4 4 23º f/16 Auto 5.0 ft. (1.50m) 52mm Built-in n/a
135mm f/2.8 ES 4 4 18º f/16 Auto 5.0 ft. (1.50m) 58mm Built-in n/a
200mm f/3.5 ES 4 4 12º f/16 Auto 7.5 ft. (2.30m) 67mm Built-in n/a
400mm f/6.3 ES 3 3 f/32 Pre-set 30.0 ft. (9.0m) 72mm Screw-in n/a
600mm f/8.0 ES 3 3 f/32 Pre-set 33.0 ft. (10.0m) 41.27mm
Drop-in
Ser.VI
Screw-in n/a
800mm f/8.0 ES 4 4 3º-47º f/32 Pre-set 60.0 ft. (18.0m) 41.27mm
Drop-in
Ser. VI
Screw-in n/a
90-230mm f/4.5 ES Zoom 6 11 27º-10º f/16 Auto 8.0 ft. (2.5m) 58mm Built-in n/a
Macro
60mm f/2.8 ES
4 5 39º f/16 Auto 9-1/4 in. (0.235m) 52mm None n/a

Additional Accessories Available for Mamiya Auto XTL and X-1000 Cameras
The following are the original Mamiya accessories available for these cameras:

Filters: A series of five high-quality filters, designed to maintain the high performance of the Mamiya-Sekor CS lenses are available, except for series VI filters. They come in the following types: SY48 (Y2), SO56 (O2), SL39 (UV), YG, SL-1B (skylight).
Lens Hoods: Lens hoods are either available a screw-in accessories or built-in as retractable hoods, except for the 28mm and 35mm lenses, which slip onto the lens barrel. Always use the lens hood designed for the specific focal length of the lens being used.
Diopter Correction
Lenses:
Many near- and far-sighted persons have difficulty looking through a viewfinder wearing glasses, but cannot focus accurately with them. Diopter Correction lenses, available in six different strengths, adjust for this deficiency.
Rubber
Eye Cup:
The rubber eye cup helps prevent unwanted light from entering the viewfinder from the back and sides.
Magnifier: Useful aid for critical focusing required in close-up photography. Mounts to rear viewfinder. Image size is doubled, and the Magnifier provides for diopter adjustment.
Angle Finder: Useful for waist level or right angle viewing, the Angle Finder has click stops every 90º and freely rotates 360º. Has built-in diopter adjustment.
Portable
Copy Stand:
A light, portable four-legged copy stand used to insure the film plane of the camera is held parallel with the copy material.
Auto Bellows: A versatile bellows unit for photomacrography. Rack and pinion control allows precise adjustment. Additional features include a double cable release for diaphragm automation and provision for mounting the lens reversed, for large magnifications.
Slide Copier: Used with the bellows unit, the slide copying attachment is mounted in front of the lens to allow copying of slides and filmstrips. It has a slide stage that makes it easy to crop mounted slides, and a removeable film tray to facilitate copying long rolls of 35mm film.
Bellows Stand: Actually a small stage for photographing small objects. The platform rotates to allow for best positioning, and has clips to hold objects in place. The surface has a reflectance of approximately 18%, ideal for exposure measurements. A clear glass stage is provided for backlighting and incident light measurement.
Chest Pod: Convenient one-legged support when hand-holding or a large tripod would be impractical.
T-mount: The T-mount adapter allows you to use preset T-mount lenses on your Mamiya X-1000.
P-mount: The P-adapter permits the use of either automatic or preset lenses that use the universal (42mm) Pentax-type screw mount. Lenses with an automatic diaphragm pin will be useable in a semi-automatic manner.

© 2000-2010  R.L. Herron    All Rights Reserved.  Legal